EBARA PUMP USE MECHANICAL SEAL 16MM
- Model number: There are various model numbers, such as LP - EBARA 16mm, S2 - 16mm, etc.
- Shaft size: 16mm.
- Material: Commonly used materials include SIC/SIC/Viton SUS304, CAR/SIC/FKM/316, etc. SIC (silicon carbide) offers high hardness, good wear resistance, and corrosion resistance. Viton has excellent resistance to oil, chemicals, and high temperatures. SUS304 and 316 stainless steels provide good corrosion resistance.
- Maximum pressure: ≤ 25 bar.
- Liner speed: 15 m/s.
- Maximum temperature: - 15 - 120 ℃.
- Sealing frame: Stainless steel.
- Structure and installation: The mechanical seal for Ebara pumps is often of the cartridge type. All components of the mechanical seal are integrated on one shaft sleeve, which is installed between the pump shaft and the motor shaft. This design offers the advantages of easy installation, safety, and convenience in use.
- Working principle: During the operation of the Ebara pump, the mechanical seal forms a sealing interface between the rotating and stationary rings. The spring - loaded mechanism ensures that the sealing faces are in close contact, preventing the leakage of the pumped medium. The secondary seals, such as O - rings, further enhance the sealing effect.
- Product application: It is mainly used for the mechanical seal of Ebara pumps, such as the EVMS and EVMSG series pumps. It can also be applied to other similar - type pumps that require high - performance mechanical seals. It is suitable for various media, including clean water, sewage, chemical liquids, etc.
